Screw A = Reserve trigger creep (over travel after the shot breaks) - turn clockwise to decrease travel after the shot break.
Screw B = Final creep (second stage length) - turn clockwise to decrease sear engagement, which similar in action to pulling the trigger. Do not reduce it too much or the gun may become unsafe.
Screw C = Trigger weight - turn clockwise to increase trigger pull. Set to no less than 500 grams (many shooters set it to 530 - just to be sure).
Screw D = Trigger shoe adjustment on bar
Screw F = First stage length - turn clockwise to decrease first stage travel.
Turning the screw too far will start to apply pressure to the sear (like pulling the trigger).
Found this on another site, figured it would be good to spread the knowledge.
No comments:
Post a Comment